Description
Pressure Injury Prevention Solution for Post-Acute Care
Gentler, softer pressure relief and skin moisture control for hypersensitive individuals.
Abbreviations: NH, nursing home; PI, pressure injury; S/C II, Stage/Category I.
Over 11% of NH residents develop PI. 50% are partial skin loss, pink wounds (S/C II), but can quickly deteriorate, requiring hospital readmission and 12 hospitalization days. Residents with PI are 41% less likely to be discharged and 39% more likely to be deceased during their stay.
NH residents often develop moisture-related skin damage (from prolonged exposure to feces and urine) within 13 days after admission. 39% worsens into PI after 2 weeks. Lack of staff, resources, and PI-related training and knowledge significantly complicates patient care, leading to high PI risks.
The Serene Air mattress simplifies pressure injury prevention for hypersensitive patients by using softer, more gentle, firm presses to optimize pressure relief without damaging the skin and mattress surface ventilation to maintain proper skin moisture conditions. Ideal for postoperative and post-acute care.
If you would like information or advice, don’t hesitate to contact us.
Improves blood circulation & comfort
- Pulsation follows the clinical guideline’s suggestion to use soft, gentle, and firm presses to avoid tissue damage while improving pressure injury prevention.
- Blower (> 1,300 lpm) provides true low air loss and optimizes heat and moisture reduction at the interface.
- Blower system supplies air at 1,300 lpm, fully inflating the air mattress in under 2 minutes, minimizing support surface prep time.
- Foam pad beneath the air cells and seat inflation optimizes cushioning, pressure relief, and bottom out prevention.
Serene Air – very high risk mattress features
Improved blood circulation
Slow, gentle, firm pressing improves blood circulation for patients uncomfortable with repositioning and alternating pressure
pressure injury prevention
Blower system provides true low air loss to dissipate skin moisture and heat buildup, improving pressure injury prevention.
Triple-layer cushioning
Triple-layer cushioning (air cells, foam, and seat inflation tuning) prevents bottom outs and improves safety and comfort.
Under 2 mins to inflate
Blower system (> 1,300 lpm) fully inflates the mattress in under 2 minutes, optimizing workflow efficiency and care quality.
Serene Air mattress specifications
| Pump | Dimension | 12.3” x 10.2” x 6.3” / 31.2 x 26 x 16 cm |
| Weight | 11.0 lb / 5.0 Kg | |
| Case Material | Flame retardant ABS | |
| Supply Voltage | AC 110-120V 60Hz, 4.5A | |
| Operating Cycle | 5/10/15/20 min. selectable | |
| Mattress (36″) | Mattress type | 8’’ Mattress with 2” Foam pocket (Foam is not included) |
| Dimension | 78.7” x 35.4” x 8” / 200 x 90 x 20.3 cm | |
| Cell Height | 8” x 20 cells | |
| Weight | 16.5 lbs / 7.5 Kg | |
| Material | Cover: 4–Way Stretch; Cell: Nylon/PU; Base: Nylon/PU | |
| Maximum Patient Weight | 440 lbs/ 200 kg | |
| Flame Retardant Standards | EN 597-1 & EN 597-2 | |
| HCPCS code | E0277 | |
| Mattress (42″) | Mattress type | 8’’ Mattress with 2” Foam pocket (Foam is not included) |
| Dimension | 78.7” x 42” x 8” / 200 x 107 x 20.3 cm | |
| Cell Height | 8” x 22 cells | |
| Weight | 18.8 lbs / 8.5 Kg | |
| Material | Cover: 4–Way Stretch; Cell: Nylon/PU; Base: Nylon/PU | |
| Maximum Patient Weight | 700 lbs/ 320 kg | |
| Flame Retardant Standards | EN 597-1 & EN 597-2 | |
| HCPCS code | E0277 | |
| Mattress (48″) | Mattress type | 8’’ Mattress with 2” Foam pocket (Foam is not included) |
| Dimension | 78.7” x 48” x 8” / 200 x 122 x 20.3 cm | |
| Cell Height | 8” x 26 cells | |
| Weight | 21.0 lbs / 9.5 Kg | |
| Material | Cover: 4–Way Stretch; Cell: Nylon/PU; Base: Nylon/PU | |
| Maximum Patient Weight | 990 lbs/ 450 kg | |
| Flame Retardant Standards | EN 597-1 & EN 597-2 |
Downloadable documents (PDF)
Preventing pressure ulcers
It can be challenging to prevent pressure ulcers completely, but there are some things you or your care team can do to reduce the risk. These include:
- Regularly changing your position – if you’re unable to change position yourself, a relative or carer will need to help you
- Checking your skin every day for early signs and symptoms of pressure ulcers – this will be done by your care team if you’re in a hospital or care home
- Have a healthy, balanced diet that contains enough protein and a good variety of vitamins and minerals – if you’re concerned about your diet or caring for someone whose diet may be poor, ask your GP or healthcare team for a referral to a dietitian
- Stopping smoking – smoking makes you more likely to get pressure ulcers because of the damage caused to blood circulation
If you’re in a hospital or care home, your healthcare team should be aware of the risk of developing pressure ulcers. They should carry out a risk assessment, monitor your skin and use preventative measures, such as regular repositioning.
